MJ DTNS: the viewing cabin on the roof




02.11.2026
In the middle of the roof of the MJ DTNS measuring car there is a viewing cabin. From here the crew controls the measuring pantograph and reports defects of the overhead line.

Design visualisation of the viewing cabin. The blue areas show where the wipers sweep.
Windscreen and windows
The windscreens are heated with a metal foil. The heating is switched on and off from the control desk, separately for each direction of travel. The windscreens have two-arm wipers, and the washer fluid is filled separately for each side.
The glass is a sandwich 18.4 mm thick, 20.8 mm with the anti-spall layer. Its composition is tested for an impact at 400 km/h. This follows from the nominal speed of 230 km/h plus 160 km/h, as set in EN 15152.
All side windows can be shaded with mechanical roller blinds.
The workplaces
The cabin has two workplaces, one for each direction of travel. Each has monitors, control desks and, at one of the monitors, a pull-out keyboard with a touchpad.

Design visualisation of a workplace in the viewing cabin.
The vertical desk carries the radio display, a handset, and a microphone and loudspeaker for communication with the measuring laboratory. At one of the workplaces it also has the pantograph controls: up and down, a switch between AC and DC, indicators of the pantograph pressure, and a STOP button for retracting the pantograph in an emergency. The other workplace has the STOP button too.
One box with six labelled buttons is used to report defects of the overhead line. There is one box in the cabin, and it connects at either workplace. Its coiled cable is 1 m long and extends to 4 m.
The reach distances to the controls are based on UIC 651.
What is recorded
Cameras record the measuring pantograph, the overhead line it measures and the collector. They are mounted close to the longitudinal axis of the car, in the area cleaned by the wipers. The tilt of each camera can be adjusted and locked.
Working conditions
Each workplace has four adjustable ventilation outlets. The cabin has air conditioning and heating. The ceiling lights over the workplaces have two levels, full and dimmed. The stairs have their own LED lights.
Access
The cabin is reached by stairs.

Plan view of the viewing cabin with the access stairs in the middle. The colours are from the drawing.
Where the cabin sits
The roof of the measuring car is lowered along most of its length. The cabin sits in the middle of the roof. A measuring pantograph is at one end of the car and a supply pantograph at the other.